These are instructions for mounting the shock to the motorcycle. The shock has been preset for your weight, skill, and riding type.  The preset adjustments are listed on your Setup Sheet.

After mounting the shock please check the Sag. Click here for details.

Click here for General G3-S Instructions.

Note: Click on the images to enlarge.

1.    Block the ATV up so there is no weight on the wheels. Remove the stock shock absorbers.

2.    Install Race Tech shocks. The reservoirs mount on the frame downtube in front of the motor. The Reservoir line should be routed over the top of the radiator.

3.    Mount the reservoir using the rubber pads and clamps. The mounting clamps should be located as far apart as possible and tightened so that the reservoir cannot move under any riding conditions.

4.    Torque shock bolts to factory specifications.

The shock is preset for you. Please check the sag before you ride.