G3-S Mounting Instructions


These are instructions for mounting the shock to the motorcycle. The shock has been preset for your weight, skill, and riding type.  The preset adjustments are listed on your Setup Sheet.

After mounting the shock please check the Sag. Click here for details.

Click here for General G3-S Instructions.

Note: Click on the images to enlarge.

1.    Remove the stock shock absorber according to the procedures in the BMW service manual.

2.    Install the G3-S shock with the Line Fittings facing the back of the motorcycle as shown.

3.    With the G3-S in position reinstall the Upper and Lower shock Bolts and torque to factory specifications.

4.    Mount the Reservoir to the left side Sub Frame Rail as shown. Use the included Reservoir Mounting Kit, place the Rubber Pads and Clamps as far apart as possible and tighten so that the reservoir cannot move under and riding circumstances.

Have Fun!! Go Ride!!  

The shock is preset for you. Please check the sag before you ride.