G3-S Mounting Instructions

2007-10 BMW R1200GS Rear
With Remote Hydraulic Preload Adjuster

These are instructions for mounting the shock to the motorcycle. The shock has been preset for your weight, skill, and riding type.  The preset adjustments are listed on your Setup Sheet.

After mounting the shock please check the Sag. Click here for details.

Click here for General G3-S Instructions.

Note: Click on the images to enlarge.

1.    Remove the stock shock absorber according to the procedures in the BMW service manual.

2.    Install G3-S with Reservoir Hydraulic Line facing the back of motorcycle.

3.    Torque Upper and Lower Shock Bolts to factory specifications.

4.    Attach Reservoir to Frame in position shown. Use included Hose Clamps and Rubber Pads to secure to Frame Rail.

5.    Attach Remote Hydraulic Preload Adjuster to Frame Rail using the included Bracket.

6.    Securely tighten all Bracket Bolts, so that the Adjuster Knob cannot move under any riding circumstances.

Have Fun!! Go Ride!!

The shock is preset for you. Please check the sag before you ride.