SK INSTALL G3S DUCATI GT 1000

G3-S MOUNTING INSTRUCTIONS

DUCATI GT1000 & SPORT CLASSIC 1000

These are instructions for mounting the shock to the motorcycle. The shock has been preset for your weight, skill, and riding type. The preset adjustments are listed on your Setup Sheet.

After mounting the shock please check the Sag. Click here for details.

Click here for General G3-S Instructions.

Note: Click on the images to enlarge.

1. Remove the stock shock absorber.

2. Replace the stock shocks with your Race Tech Shock Absorbers.

3. The Reservoir Lines should face the back of your Motorcycle.

4. Mount Reservoirs to the frame directly under the rear tail section of the seat.

5. Use the rubber pads and clamps. The mounting clamps should be located as far apart as possible and tightened so that the reservoir cannot move under any riding conditions.

6. Torque shock bolts to factory specifications.

The shock is preset for you. Please check the sag before you ride.