SK INSTALL G3S OUTLAW 525IRS

G3-S FRONT MOUNTING INSTRUCTIONS

OUTLAW 525IRS

These are instructions for mounting the shock to the motorcycle. The shock has been preset for your weight, skill, and riding type. The preset adjustments are listed on your Setup Sheet.

After mounting the shock please check the Sag. Click here for details.

Click here for General G3-S Instructions.

Note: Click on the images to enlarge.

1. Remove stock shock absorbers.

2. Install Race Tech shock absorbers. The shock reservoirs mounts to the front frame rail as shown above. Mount the reservoir using the rubber pads and clmps. The mounting clamps should be located as far apart as possible and tightened so that the reservoir cannot move under any riding conditions.

3. Torque shock bolts to factory specifications.

The shock is preset for you. Please check the sag before you ride.